Oxford Garden Siena Ottoman - Manual (Page 2)

Assembly Instructions
page 2
Siena Ottoman
Step 1
On a clean flat surface, lay the leg assembly 2 on its side mortise holes
facing up. Line up the foot rest 1 , and insert into the leg assembly.
Step 2
Line up and place leg assembly 2 onto those parts already assembled.
Step 3
With a hammer, drive 8 total dowels A into the predrilled holes on the
front and rear of the leg assemblies 1 . Insert the tapered end of the
dowels first. NOTE: The dowels should be easily driven in flush. If there
is strong resistance, do not force the dowel. Sand to smooth off areas
around the dowel pins. Your ottoman is now ready to enjoy!
A
1