Pavement Ends 51197 Replay - Manual (Page 7)

51197 pg 7 0710 Rev. C
Step Twenty
I
NSTALL
T
AILGATE
B
AR ON
V
EHICLE
Insert the Tailgate Bar into the mounts on each side
of the tailgate opening with the vinyl side of the Rear
Window toward the outside of the vehicle.
Place Tailgate
Bar in mounts
Step Twenty-one
S
ECURE
R
EAR
W
INDOW
Z
IPPERS
To start the zipper, pull the two sliders as far down as possible
on the driver’s side of the window in order to catch the sliders
to the pin.
Once the zipper is caught, start the top slider 1/2". Then hold
up the top of the window with one hand and close the zipper
with the other. The zipper is sandwiched between layers of
fabric in the corners so be careful not to catch extra fabric in
the zipper. Close the zipper.
Make sure that the Tailgate Bar is centered and is securely in
the mounts. Then tuck the fl aps on the Rear Window under
the top fabric.
Tuck Flaps
under top
Pull both sliders down as far
as possible to catch pin
Start
Zipper
Step Twenty-two
S
ECURE
R
EAR
W
INDOW
F
LAPS
Inside the top locate the fl aps sewn to the top on
each side of the rear window opening. Pull the fl aps
over to cover the zipper and tuck them in.
View from inside top
Rear Window
Pull fl ap over
to cover
zipper and
tuck in