Paxton Net2 desktop reader USB - Manual

Ins-30081 Net2 desktop reader USB
28/09/2010
Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for
identifying lost cards. Additional workstations can also have desktop readers.
With the Net2 software running, any new token presented above the desktop reader will cause the new user
wizard to appear with the card number displayed. Additional user details can then be entered.
If the token is already known to the system, the relevant user’s record will appear.
Paxton
Installation
Plug the reader into a convenient USB port on the PC using the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
0 °C +55 °C
4.75V DC 5.25V DC
100 mA
115 mm 75 mm 19 mm
The power for the unit is supplied via the USB cable. No additional power supply is required.
Voltage
Specifications
Operating temperature
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Waterproof
Min Max
No
USB certified
This unit requires Net2 v3.09 or later software. Support for Mifare cards requires v4.15 or later.
Call Technical Support if you require a software upgrade.
The declaration of conformity is available on request. Contact details are provided at:
http://paxton.info/596
Paxton