Paxton Net2 desktop reader, proximity and magstripe USB - Manual

Desktop Reader
The desktop reader is designed to sit next to the PC. It is used for adding tokens to a Net2 system and also for identifying lost
cards. Additional workstations can also have desktop readers.
With the Net2 software running, any new token presented above the desktop reader will cause the new user wizard to appear
with the card number displayed. Additional user details can then be entered.
If the token is already known to the system, the relevant user's record will appear.
Installation
Plug the reader into a convenient USB port on the PC using the supplied USB cable.
Stop and then restart the Net2 server program. The device will now be available to the Net2 program.
0 °C 55 °C
4.75V DC 5.25V DC USB certified
100 mA
145 mm 90 mm 37 mm
Voltage
Specifications
Operating temperatures - all items
Electrical
Environment
Dimensions
Min Max
Width Height Depth
Current
Waterproof
Min Max
No
This unit requires Net2 v3.09 or later software. Call Technical Support if you require a software upgrade.
The declaration of conformity is available on request.
Contact details are provided at: http://paxton.info/596
Ins-30071 Net2 desktop reader, proximity and magstripe USB
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
07/06/2011 Paxton