Paxton Net2 I/O board User Manual
Page 2
Select 'I/O boards' in the left hand tree diagram.
To enable the 'I/O board' icon, the 'Triggers & Actions'
icon needs to be active. Check in the view menu and
then select Triggers and Actions and then I/O boards
as necessary.
The 'I/O boards' option will remain grey until the
'Triggers & Actions' tab has been selected.
Detect - Clicking on this button will detect all I/O boards on the local network.
Identify - Clicking this button will cause the on-board sounder to 'beep' helping to locate this I/O board.
Reset - Clicking on this button will return the user settings to the factory default values.
Remove - Deletes an I/O board from the list.
Replace - This feature will enable an I/O board to be easily replaced. Once the new I/O board is online, a
wizard will copy all the settings from the old unit into the new I/O board.
I/O Board software configuration
Detection of the I/O boards