Paxton Switch2 control unit - Manual

Page 1
R eader or K
eypad
D
oor r
ela
y
Power
Alar
m 12V
Red LED
Amber LED
Bell
12V
0V
N.C.
N.O.
COM
Green LED
Data
Caution:
F
or
12V
d.c readers only
.
F
or
correct
connection
of
old 5V
readers,
please ref
er
to
instructions.
Clock
Exit
Inputs
Contact
Media Detect
0V PLACE SERIAL
NUMBER
LABEL HERE
Switch2
http://paxton.info/107
123456
Quickstart guide
This supplement is a brief guide to installing a Switch2 system. Further information is available for download at:
http://paxton.info/45 or call the communications team on: 01273 811011.
Exit button
Black/0V and Exit
(push to make)
Reader
Fail closed release
(for Paxton exit buttons
GREEN and RED wires go
to reader terminals)
Fail open locks
For a fail open lock (Maglock), wire 0V to the "N.C." terminal instead of "N.O."
22/01/2013
*
This product is not suitable for retail sale. All warranties are invalid if this product is not installed by a competent person.
Wiring
Ins-30010 Switch2 control unit
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
To change a reader port voltage to 5V, move the red jumper(s) located beneath the wiring label to the 5V setting.
Paxton