Paxton PROXIMITY slimline reader (697-411BL/WT) - Manual

PROXIMITY slimline reader (697-411BL/WT)
Contents in box
PROXIMITY slimline reader
PROXIMITY slimline back plate
Fitting kit
PROXIMITY slimline reader instructions
Suitability
Products
The reader is designed to work with the Switch2 control unit (405-321) and the PC based Net2 control unit
(489-334).
PROXIMITY cards
All Paxton Access Ltd PROXIMITY tokens will work with this reader. They include the PROXIMITY card,
PROXIMITY keyfob and PROXIMITY ISO card.
Read range
The PROXIMITY slimline reader has a read range of 100mm when PROXIMITY cards are used in normal
conditions and 55mm when PROXIMITY keyfobs are used in normal conditions.
Environment
The reader will operate between –20
o C and +70 o C. It can be mounted onto a metal frame, but this may
reduce the read range.
Where to use PROXIMITY slimline
YES NO Reason why not
Low to high use doors Behind Metal RF will not penetrate
Inside and outside Very near to TV or Monitor RF will interfere with reader
No need to shelter from the elements
Narrow door frames and inside walls
Architecturally sensitive installations
Fitting
1. Using the base plate as a template, mark
and drill holes for the cable and the four
screws.
PROXIMITY
slimline reader
securing screw
6 x 3/4
Wall plugs
Cable
2. Tap the four small raw plugs into the wall.
Fix the base plate securely with the screws
provided.
3. Feed the reader cable through the back
plate and hang the reader at an angle over
the back plate. Then slot the reader into
the groove at the top of the base plate and
press the reader into place.
4. Screw in the securing screw at the base of
the reader.
IMPORTANT NOTE: When fitting 2 readers for read in and
read out, the PROXIMITY readers MUST be more than 1ft apart!
INS-137 Date code: 180101