Penpower WorldPenScan (Mac) - Manual (Page 13)

2-6 WorldPenScan Series
2.7 Connect to Pen Scanner
You can plug pen scanner into your computer's USB port via the USB cable to use
WorldPenScan or WorldPenScan BT. Besides, WorldPenScan BT can be connected with
computer via Bluetooth for use. Please follow the instructions to pair your computer and
pen scanner with Bluetooth at first time use.
1. Press the function button on pen scanner until the status light blinks. When the status light
blinks, you can begin to pair the computer with pen scanner.
2. Launch WorldPenScan BT and click [Tools] button to select [Settings] from the
drop-down menu. Then go to the [Hardware info] page.
3. Click [Pair].
4. Select [WorldPenScan] on [Bluetooth Setup Assistant] and click [Continue].