Penpower WorldPenScan (Mac) - Manual (Page 24)

3-9 Chapter 3 Scanning and Settings
Scanning Vertical Text
When scanning vertically aligned text, you can choose [Vertically] and then select [Left-
hand] or [Right-hand]. To scan the text, please hold the pen firmly as you hold a high-
lighter, with the pen tip at an angle between 70 to 80 degrees to the page. Align the Scan Tip
arrow on your pen to the center of the characters.
Left Hand Right Hand
Note: Penpower WorldPenScan series is able to scan and recognize one row of characters
at a time. Please place the pen in such a manner so that the Scan Tip arrow is at the
center of the line of text.
Left hand:
Scan from right-to-left or from left-to-right
Right hand:
Scan from left-to-right or from right-to-left
Note: The Left/Right-handed option only available when you select the vertical direction.
Scanning Horizontal Text
When scanning horizontal text, you can choose the [Horizontal] option. Hold the pen
scanner firmly, as you would hold a highlighter, while the Pen's tip is at an angle of between
70 and 80 degrees to the page. Align the Scan Tip arrow on your pen to the center of the
characters. Then move the pen left-to-right or right-to-left to scan.