Bissell FLIP-IT 5200 - Manual (Page 7)

7
Remove the Clean Tank from the machine.
Unscrew the Black cap on the bottom of the
solution tank and remove the insert.
Filling the Clean Tank:
Fill with BISSELL Formula to the Formula fill
line and fill with Water to the Water Line. Replace
the Valve and Cap Assembly. Place the full tank
back into the unit.
The first time you use your unit, the Gentle Clean™
Pad will be in the unit. Based on your flooring
type and personal preference, you may want to
change to the Gentle Clean™ Brush.
Keep plenty of genuine BISSELL Hard and Wood
Floor Cleaning Solutions on hand so you can clean
when it fits your schedule. Always use genuine
BISSELL cleaning formulas.
Inserting The Gentle Clean™ Brush or Pad
Tip:
When using a
Dry Gentle Clean™
Pad, you may
want to get it
slightly damp by
squeezing the
trigger to saturate
the pad. This will
aid in the flow of
water and formula
to clean sticky
grime and spots.
Tip:
When plugging
the unit in, make
sure to hook the
power cord into
the Cord Clip. This
will help guide the
power cord when
you flip from Dry
to Wet Cleaning.
2.
1.
How To Use Your Flip-It Hard Floor Cleaner
Getting Ready
Tip:
Use only specially
formulated
BISSELL Hard
Floor and Wood
Floor Solutions
formula.
Non-BISSELL
cleaning formulas
may harm the
machine and void
the warranty.
Cleaning Fluid Section
32 oz.
0482 32 oz.
0484
3.
WARNING:
To Reduce the Risk of Fire and Electric Shock
due to internal componet damage, use only
BISSELL cleaning fluids intended for use
with the hard floor cleaner.