BOXLIGHT MP-350m - Manual (Page 6)

iii
SAFETY INSTRUCTIONS
Please read and follow all safety instructions provided BEFORE
using your new projector. Failure to comply with safety instruc-
tions may result in fire, electrical shock, or personal injury and
may damage or impair protection provided by equipment. Please
save all safety instructions.
Safety Definitions:
•
Warning: Statements identify conditions or practices that
could result in permanent personal injury.
• Caution: Statements identify conditions or practices that could
result in damage to your equipment.
Safety Terms:
•
Warning: Don’t look directly into the lens when the projector is
turned on.
• Warning: Don’t block ventilation openings.
• Warning: To replace the lamp, turn the power off and
unplug the power cord. To avoid burns, wait 30 minutes
before opening the lamp door. Follow all instructions provided
in this User’s Guide.
• Warning: Please use the power cord provided. Connect
the power cord to a receptacle with a protective safety
(earth) ground terminal.
• Warning: Visible laser radiation. Do not stare into
beam.
• Warning: Refer all service to qualified service personnel. Ser-
vicing your own projector will void the warranty. See the next
page for the customer service contact information.
• Caution: Don’t set liquids on the projector. Spilled liquids may
damage your projector.
• Caution: Don’t place the projector on a hot surface or in direct
sunlight.
• Caution: Do not drop the projector. Transport the projector in a
Boxlight-approved case; see page 50 for a list of cases.