PIAA 1500 Back-Up User Manual
Page 3
LAMP
INSTALLATION
• The work site must be clean and level with enough working space to complete
the job without distractions.
• The PIAA 1500 Back-Up lamp is intended to mount hanging down or upright.
For an upright mount just reverse the mounting bracket. The "PIAA" on the lens
should always read right side up.
• When mounting the lamps mount them in such a place that they are free
of obstructions.
• Do not modify the lamp system in any way or it will void the warranty.
• Do not mount the lamps in a place that will obstruct an existing
automotive function.
• Do not mount the lamps so low to the ground that they have a chance
to get damaged easily.
• When the lamp mounting spot has been decided use the supplied double-sided
tape to mount the lamps and/or the supplied mounting screws.
• If using the double-sided mounting tape, the mounting surface must be clean
and oil free. The double-sided tape works best at room temperature
above 65ºF (18ºC).
2.