PLX Devices DM-6 - Manual

Setting up the DM-6 Multi Gauge to the SM-AFR
Navigating the DM-6
There are a total of 3 capacitive touch buttons on the DM-6. They are highlighted in the image below.
Use the left button to toggle between sensors.*
In the Peak/Hold view, holding the right button will open a menu option
to save or reset current/all peak/hold values.
Use the right button to toggle between Numeric, Graph, and Peak/Hold
screen views.
Hold the logo button to display unit label and range. Left and right values
refer to entire LED sweep range.
* - Sensors available are based on Sensor Modules in daisy chain. Dis-
play order is based on location of the Sensor Module in the daisy chain
The Menu
Pressing and holding both left and right buttons together will take you into the menu system. Once
inside the menu system, use the left button to save changes, the logo button to select which menu item is
currently selected, and the right button to access the current selection option. Please note the icons used.