PLX Devices Legion Meter - Manual (Page 5)

PLX
devices inc.
PLX
devices inc.
www.plxdevices.com www.plxdevices.com
8 9
6
Technical Specifications
Legion Meter
Voltage Range:
Meters:
Connector Type:
Power Range:
Human Interface:
Physical Dimensions:
Current Range:
Intellectual Properties:
Display:
Operating Temperature:
Construction:
Weight:
3.0 - 6.0 Volts
High Contrast OLED 128 x 32 Pixels
1 Digital Push Button, 1 Slide Switch
0 - 3.7 Amps
2.5 x 0.9 x 0.5” (6.3 x 2.3 x 1.3 cm)
ABS Plastic
0 - 22.2 Watts
0.8oz
0 - 85 Degrees Celsius
Voltage, Current (in/out), Power, mWh Counter
1 USB Male A, 1 USB Female A (Gold Plated)
PLX Intelligent Battery Monitoring and Metering, PLX USB Charge Accelerator
Patents Pending
Modes: Power Metering, Current Counter, Charge Accelerator
TERMS OF USE – PLX Devices Inc. does not guarantee product functionality with any third party device. Implementation and
integration of PLX products with any other device(s) must be done at your own risk.
LIMITED WARRANTY – PLX Devices Inc. warrants this product to be free from defects for 1 year from the date of purchase. If
applicable, non-serviceable items are excluded from stated warranty. Serviceable goods must be determined by PLX Devices to be
defective before any warranty or replacement is issued. PLX Devices’ obligation under warranty shall be limited to repairing or
replacing, under the discretion of PLX Devices, any part proven defective. This warranty is limited to the repair or replacement of parts
in the manufactured good and the necessary labor done to affect its repair or replacement.
SERVICE UNDER WARRANTY – In the unlikely event that your PLX Devices hardware should fail during the warranty period, a
Return Material Authorization number (RMA) must be first retrieved from PLX Devices Customer Support. Support can be
contacted through email: [email protected] or by phone: +1-408-745-7591. All serviceable goods must be packaged securely with
proof of purchase, RMA number, with all shipping charges prepaid and shipped to PLX Devices Inc. Goods returned under warran-
ty must be received by PLX Devices Inc. within (10) business days after the RMA number has been issued. Goods received after this
period is
subject to fees for the service of repair or replacement. All repaired or replaced items shall be warranted for the remainder of the
original product warranty.
RETURNS AND RESTOCKING FEE – All returns must be within 30 days of receipt. A 15% restocking fee will apply to applicable
PLX Devices products returned for refund. All returns are to be packed in original condition including packaging, documentation,
manuals, and accessories. Returns that do not include all the accessories and components may be returned to the customer or charged
on a per item basis. The customer assumes responsibility for product until receipt at PLX Devices Inc. Shipping via an insurable carrier
is recommended. Any unauthorized shipping charges will be billed to the customer or shipment will be refused.
DISCLAIMER – PLX Devices Inc. shall not be liable for direct, special, incidental, or consequential damages resulting from any legal
theory including, but not limited to, lost profits, downtime, goodwill, damage, injury to persons, or replacement of equipment and
property due to improper installation, integration and/or misuse of any PLX Devices Inc.’s product(s). This warranty applies to the
original purchaser of product and is non-transferable. All implied warranties shall be limited in duration to the said 1 year warranty
period.
LegionMeterG1_USB_UGV1.0