Pololu Custom Laser User Manual
Page 20
QuantityMaterial Description
2
1/8" clear
acrylic
Circle diameter 3"
8
1/16"
black
ABS
5" x 5" square with four 1/8"-diamter mounting holes in the corners (center of mounting holes
should be 1/2" away from the corners of the square)
10
1/16"
white
Delrin
Circle diameter 10" with 1/4" center hole, will supply the Delrin in 12" x 12" sheets, will ship a
few extra sheets just in case, material will be coming from
• If you are drawing a sketch by hand, please scan your drawing and send the resulting JPG, GIF, BMP, or PDF
file. Kinko’s, Office Max, Office Depot, or any copy shop should be able to make a scan for you.
• Mock-ups and scans should include all relevant dimensions (be sure to indicate the units of measure you are
using). Please try as much as possible to make your drawings close to scale.
• When showing the location of a hole, please specify the distances from the hole’s center to the nearby edges
of the part.
• Include the quantity required for each part.
• Include the material type, thickness, color, and supplier for each part. You can see the materials we stock at
our materials page. If you will be supplying the material, please specify the sheet size you will be sending.
• If you need to send more than one file, please zip the files.
To order custom laser cut parts, proceed to the
Custom Laser Cutting Guide
© 2001–2014 Pololu Corporation
5. Instructions for Laser Cutting File Setup
Page 20 of 29