Practical instrument electronics, Accessories, Piecal 422 specifications – Practical Instrument Electronics 422 (2014) User Manual

Page 8

Advertising
background image

Practical Instrument Electronics

82 East Main Street Suite 3.14 • Webster, NY 14580 Tel: 585.872.9350 • Fax: 585.872.2638 • [email protected] • www.piecal.com

Page 8

Accessories

Optional: T/C Wire Kit 1 for Types J, K, T & E

Part No. 020-0202

Optional: T/C Wire Kit 2 for Types B, R/S & N

Part No. 020-0203

Three feet (1 meter) of T/C extension wire, stripped on one end with a miniature T/C

male connector on the other end.

Standard Test Leads (Included with calibrator)

Part No. 020-0207

Three feet (1 meter) of wire with an alligator clip on one end and a spring loaded

protected banana plug on the other end.

Optional Ni-MH 1 Hour Charger w/4 Ni-MH AA Batteries

Part No. 020-0103

(100-120 V AC input for North America Only)

General
Accuracy

±(0.008% of Reading + 0.006 mV)

Cold Junction Compensation

± 0.16°F (±0.1 °C)

Millivolt Range

-13.000 to 80.000 mV

Operating Temperature Range

-25 to 60 °C (-10 to 140 °F)

Relative Humidity Range

10 % ≤RH ≤90 % (0 to 35 °C), Non-condensing
10 % ≤RH≤ 70 % (35 to 60 °C), Non-condensing

Size

L=5.63 x W=3.00 x H=1.60 inches

Weight

12.1 ounces (including boot & batteries)

Batteries

Four “AA” Alkaline 1.5V (LR6)

Battery Life

50 Hours

Optional NiMh Rechargeable battery kit

120 VAC for North America Only; charger, four NiMh

batteries, AC & DC cords [Part # 020-0103]

Low Battery

Low battery indication with nominal 1 hour of life left

Protection against misconnection

Over-voltage protection to 60 V dc (rated for 30 seconds)

Display

High contrast graphic liquid crystal display. LED backlighting

for use in low lit areas.

Read
Input Impedance

> 10 Megohms

Open Thermocouple

Threshold
Pulse


10,000 Ohms nominal
< 10 microamp pulse for 300 milliseconds

Normal Mode Rejection

50/60 Hz, 50 dB

Common Mode Rejection

50/60 Hz, 120 dB

PIECAL 422 Specifications

(Unless otherwise indicated all specifications are rated from a nominal 23 °C,

70 % RH for 1 year from calibration)

Source
Output Impedance

< 0.3 Ohms

Source Current

> 20 mA (drives 80 mV into 10 Ohms)

Noise

≤ 4 microvolts p-p for frequencies of 10 Hz or below

Advertising