Mixer page – Precisionsound Jetstream User Manual
Page 6
6
© Copyright Precisionsound 2014
Mixer Page
Assign
The four assign menus set the loops that are triggered when you next play a note.
We distinguish between sounds and loops. A sound is a channel containing a
loop, mixer strip, filters, and modulations. Four sounds are available, and are
colour coded on the interface (sound 1 = red, 2 = green, 3 = yellow, 4 = blue). A
loop is an audio file that can be used as the source for one or more sounds.
So for example, you could assign the same loop to all four sounds, each with
unique mixer and filter settings. Or, you could assign different loops to each sound.
Fifty loops are available. Setting an assign menu to ‘Off’ means that it is inactive and silent.
Mixer strips
Four mixer strips set the volume, stereo image, pitch and start point for each
sound.
All the numerical controls in Jetstream have a simplified value range of either 0 to
100, or -100 to +100.
Vol: sets the volume of the sound.
Pan: sets the position of the sound in the stereo field.
Width: sets the stereo width of the sound, from mono to natural stereo.
Pitch: sets the pitch of the sound.
Start: sets the start point of the sound, up to 10 seconds from the beginning of the loop.