MacDon 962 Harvest Header - Manual (Page 72)

72
UNLOADING & ASSEMBLY
INSTALL DRAPERS
NOTE: Prior to installing drapers, for delivery openings 41.7” (1060 mm) and smaller, (Case, Gleaner and
New Holland TR) install draper supports at cutterbar side of idler roller bars. See page 74, Step 3.
NOTE: Right and left side drapers are different lengths. Be sure you have the drapers properly positioned.
Drapers are marked with an identification number. Always install the lower number on the left side.
30 ' Header: Left side draper #100265 Right side draper #100266
36 ' Header: Left side draper #100267 Right side draper #100268
CONNECTION
CENTER DELIVERY
OPENING WIDTH (W)
(between rollers)
LEG TO
ROLLER EDGE
(DIM. X)
DESIGNATED APPLICATION
and COMMENTS
Row A to Row F (both drapers) 33.9" (860 mm) 22.4" (568 mm) Opening for combine models: Case 60 & 66
Series, NH-TR and Gleaner
Row A to Row E (both drapers) 41.7" (1060 mm) 18.4" (468 mm) Opening for combine models: Case 80 & 88
Series
Row A to Row H (both drapers) 49.6" (1260 mm) 14.4" (365 mm) Opening for Cat 450 & 470 Series
Row J to Row D (both drapers) 53.5" (1360 mm) 12.4" (315 mm) Opening for combine models: JD STS,
CTS, 9500, 9510 and NH-TX
Row A to Row C (both drapers) 59.5" (1510 mm) 9.6" (243 mm) Opening for combine models: JD 9600,
9610, 9650 and Cat 460 & 480 Series
Row A to Row B (both drapers) 65.8" (1670 mm) 6.4" (163 mm) Maximum opening for windrowing