MacDon R85 Rotary Disc 16 Foot Self-Propelled Windrower Headers - Manual (Page 120)

MAINTENANCE AND SERVICING
7.5.1 Maintenance Schedule/Record
Action:  - Check  - Lubricate ▲ - Change
 Hour meter reading
 Service date
 Serviced by
First use Refer to Section 7.5.2 Break-In Inspections, page 114 .
100 hours or annually Refer to Section 7.5.3 Preseason/Annual Service, page 114 .

Conditioner drive belt
See
section Inspecting the
Conditioner Drive Belt, page 142 .

Auger drive belts
See section
Inspecting the Auger
Drive Belts, page 150 .

Conditioner gearbox lube level
See
Section 7.7.3 Conditioner
Gearbox, page 146 .

Bevel gearbox lube level
See Section
7.7.1 Bevel Gearbox,
page 141 .
End of season Refer to Section 7.5.4 End-of-Season Service, page 115 .
10 hours or daily

Hydraulic hoses and lines
See Section
7.8.2 Hydraulic Hoses
and Lines, page 156 .

Cutter blades, deflectors, and discs
See Section
7.6.1 Inspecting the
Cutterbar Discs, page 126 .
25 hours

Roll universal shafts
See Section
7.5.5 Lubrication and
Servicing, page 115 .

Cutterbar driveline bearings
See Section
7.5.5 Lubrication and
Servicing, page 115 .
NOTE: A record of daily maintenance is not normally
required, but is at the Owner/Operator’s
discretion.
50 HOURS
▲
Cutterbar lube first 50 and 150 hours
See Section
7.5.8 Lubricating the
Cutterbar, page 121 .
▲
Bevel gearbox lube level first 50 and
150 hours
See Section
7.7.1 Bevel Gearbox,
page 141 .
169457
112
Rev. F