Prescolite LBC6P Pendant Mount User Manual

Instruction sheet, Lbc6p pendant mount installation instructions

Advertising
background image

www.prescolite.com

Prescolite

TollFree

Technical

Support

1.888.PRS.4TEC

Hours:

8am

- 5pm

ET

Instruction

Sheet

Part No. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93041499

Instruction

Sheet

LBC6P Pendant Mount Installation Instructions

CAUTION: DO NOT ATTEMPT TO MODIFY OR REWIRE FACTORY-INSTALLED WIRING ON THE FIXTURE. SAFETY AND PROPER

OPERATION OF THE FIXTURE DEPEND ON THE INTEGRITY OF THE WIRING.

KEEP THESE INSTALLATION INSTRUCTIONS

1. Insert socket wires through stem and

screw stem into adapter on top of the

fixture, secure with set screw.

2. Insert socket wires through canopy/

swivel assembly, screw stem into

assembly and secure with set screw.

3. Rotate and slide canopy cover from

mounting plate.

4. Align appropriate keyhole slots in

mounting plate with J-Box screws and

rotate to lock in place.

5. Connect black and white fixture wires

to the respective black and white supply

wires with wire nuts. Attach fixture and

supply ground wires to ground screw on

mounting plate.

6. Re-attach the canopy

IMPORTANT SAFETY INFORMATION. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. Follow label information and instructions con-

cerning Wet or Damp Locations, installation near combustible materials, insulation, building materials, and proper lamping. Do not install

in areas subject to combustible vapors or gases. Before wiring to power supply and during servicing or relamping, turn off power at fuse or

circuit breaker. All installation servicing or relamping must be performed by qualified service personnel. Product must

be grounded to avoid potential electric shock or other potential hazard. Product must be mounted in locations and

at heights and in a manner consistent with its intended use, and in compliance with the National Electrical Code

and local codes. The use of accessory equipment not recommended by the manufacturer or installed contrary to instructions may cause

an unsafe condition. Do not block light emanating from product in whole or part, as this may cause an unsafe condition. Do not allow items

such as drapes, curtains, screens or the like to come into contact with the product or to block light from the product, as this may cause an

unsafe condition.

701 Millennium Boulevard • Greenville, SC 29607

With representatives offices in principal cities throughout North America.

Copyright 2012, 4/12/12 revision, All Rights Reserved - Printed in U.S.A.

WARNING- This product contains chemicals known to the State of California to cause cancer, birth defects and/or

other reproductive harm. Thoroughly wash hands after installing, handling, cleaning, or otherwise touching this

product.

CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,

MAKE CERTAIN THAT THE POWER IS OFF BEFORE

INSTALLING OR SERvICING THIS FIXTURE

CANOPY/SWIVEL
ASSEMBLY

SET SCREW

SET SCREW

STEM

FIXTURE
ADAPTER

Advertising