Programming the thermostat – Pro1 T805 Operation manual User Manual

Page 5

Advertising
background image

PROGRAMMING THE THERMOSTAT

5

Filter Change Reminder

If your installing contractor has configured
the thermostat to remind you when the air
filter needs changed, you will see

FILT in the

display when your air filter needs changed.
FILT will be shown in the display after your
system has run long enough to require an air
filter change.

Resetting the filter change reminder: When
FILT reminder is displayed, you should
change your air filter and reset the reminder
by holding down the second button from the
left side of the thermostat for 3 seconds.

Temporary and Permanent Hold Feature

Temporary hold:

The thermostat will display

HOLD and RUN SCHED on the bottom of
your screen when you press the

or

key. If you do nothing, the temperature will
remain at this setpoint temporarily until the
next program period begins. Your program
setpoint will then replace your temporary
setpoint.

Permanent hold:

If you press

HOLD key at

the bottom of your screen, you will see

HOLD

appear below the setpoint temperature in the
display. The thermostat will now permanently
stay at this setpoint and can be adjusted
using the

or

keys.

To return to program:

Press the

RUN SCHED

key at the bottom of your screen to exit either
temporary or permanent hold.

Hold down for 3 seconds,
to reset filter reminder.

Set 7 Day Program Schedule

To customize your 7 day program schedule, follow these steps:

Select

HEAT or COOL using the system key. You

have to program heat and cool each separately.

Press

MENU

Press

SET SCHED

Note: Monday is displayed and the WAKE icon

is shown. You are now programming the

WAKE

time period for the Monday setting.

Time is flashing. Use the or key to

make your time selection for the Monday

WAKE

time period.

Note: If you want the fan to run

continuously during this time period, select

ON

with the

FAN key.

Press

NEXT STEP

The setpoint temperature is flashing.

Use the or key to make your

setpoint selection for the Monday

WAKE period.

Press

NEXT STEP

Repeat steps 4 thru 7 for Monday

LEAVE time

period, for Monday

RETURN time period, and

for Monday

SLEEP time period.

1.

2.

3.

4.

5.

6.

7.

8.

Repeat steps 4 thru 7 for the remaining days of the week.

Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday

Advertising