Purus PK155 Tile Grate for Minimax & Mini Brage - Manual

A gentle pressure
on the middle of
the arm releases
the knife holder
and the blade
To change the
blade, the holder is
pulled up. Blade:
Stanley 5903.
(1) Place the foot of the
knife in the floor gully. (2) Lay the vinyl over the gully
and press until the pivot on the
foot penetrates the vinyl.
(4) Take up the foot of the knife. (5) Heat the vinyl. NOTE: rub-
ber cloths shall not be
heated. (6) Place the clamping ring in
the gully with the text facing
upwards. Press it down with the
grating.
(3) Put the arm of the knife on
the pivot (the smallest hole) and
cut the hole.
PURUS Plate Reinforcement with
welded
wire net-
ting
Tile
Slab of
wood
Cross bar
PK frame Low heating cable Compound Waterproof membrane
PURUS KNIFE: FOR CUTTING HOLE IN THE VINYL CARPET/MEMBRANE
Installing PURUS floor gully with brick/tiled floor, using 13 mm
putty compound.The
membrane is connected with clamping ring.