Quadrox POS Printer - Manual (Page 20)

Quadrox POS Printer User & Installation Manual 20
Version 4.4 Series
3.2.2.2 Recordings
This tab is a part of the POS Configuration Wizard. In this tab you are able to do the
following:
ƒ Add or delete cameras to record when a ticket is generated.
Multiple recordings can be assigned to one source. This way, a ticket can be
monitored from different cameras and angles.
Set the recording time before and after a ticket is generated. This is also called the pre and
post ticket recording interval.
A ticket movie is labelled recorded footage from a camera you attached to the ticket,
i.e. when a ticket comes in, the specific period of time recorded from a specified
camera is labelled and saved. Once the recording is complete, it appears as an alarm
movie. If there aren’t any recordings (i.e. when there is no activity) for the period
when the alarm occurs, recordings still will be present as the recordings will be forced
because an alarm was triggered and considered being high priority.
To add the camera to be recorded when a ticket is generated, follow the steps below:
1. Select the camera from the drop-down list.
2. Select the pre and post ticket label interval for each camera.
3. Click the Add camera button.
4. Decide which camera will be the primary camera which will be shown when
selecting a ticket.
Recordings (Serial Port POS) Screen
To delete a camera, click Delete.
Click Finish button.