Braun VL955 - Manual (Page 27)

UP
Lift Operating Instructions
To Load Passenger:
1. Load passenger onto platform
facing outward and lock wheel-
chair brakes.
Note: Roll stops must be fully
unfolded (ramp position) until the
entire wheelchair has crossed the
roll stop. See Photos K and L.
2. Press red UP switch until platform
stops (reaches floor level). Re-
lease switch.
Handrail Switch: Slide knob out to
UP position.
Note: Roll stop must be UP
before raising platform. Platform
will raise above ground level
approximately two inches before
the roll stop reaches the fully UP
position.
O
M N
approximately 2"
P
Page 25