RF-Link VMI-1201 - Manual (Page 12)

11
a. Enable/Disable motion detection.
b. A motion detection event can trigger the
push message alert function and motion
recording function.
Motion recording is only possible
when a micro SD card is inserted into the camera. To remove
memory card, please disable motion detection first.
c. Touch the image display area of the screen and then slide onto
the screen to outline the motion detection area.
d. The interval between checks is 1 minute.
5. Motion Detection:
Note:
“Reconnect” to re-establish the Internet connection.
Note: When you complete the camera set up, please tap the “Reconnect”
icon to ensure the Internet connection is successful.
1. Reconnect: If the camera status is “offline”, you need to tap
3. Event Viewer: View event logs.
4. Change Name/Password: Change the camera name or password.
The default camera password is “admin”.
2. Delete: Delete camera from Camera List.
recommend you change the camera
password on a regular basis.
To protect your privacy, we strongly