RKI Instruments 01 Series Quik Start - Manual (Page 2)

Quick Reference Guide For 01-Series
PN 72-0141RK Rev 0
RKI Instruments, Inc. 33248 Central Ave, Union City, CA 94587
Phone (510) 441-5656 • (800) 754-5165 • www.rkiinstruments.com
5. Displaying MIN and MAX readings (OX-01)
a. Press and release POWER/MODE button to display the
minimum oxygen reading.
b. Press and release the POWER/MODE button again to
display the maximum oxygen reading.
c. Press and release POWER/MODE button again to return to
normal mode.
6. Changing the Alarm Points
a. Make sure that 01-Series is OFF.
b. Press and hold the AIR button, then press and hold the
POWER/MODE button. As soon as segments appear on the
display (approximately 1 second), release the AIR button.
When the unit “beeps,” release the POWER/MODE button
to put the 01-Series into alarm point adjustment mode. The
LCD should display the low alarm setting.
c. Use the the AIR button to increase the alarm point. Once
selected, press the POWER/MODE button to select the next
alarm level.
d. Press the POWER/MODE button repeatedly until the ROM
number of your unit appears on the LCD. The 01-Series will
then go into its startup sequence followed by the measuring
mode.
Note: Consult manual for additional information.