BOXLIGHT CD-455m - Manual (Page 19)

11
Connecting a Video Player
1 If your video player uses a round, one-prong composite video
connector, you’ll need only the audio cable, audio adapter,
and composite video cable that shipped with the projector.
NOTE: HDTV sources must be
connected to the projector using
the computer cable (not a com-
posite or S-video cable). See the
previous pages for details on con-
necting this cable.
• If your video player uses a round, four-prong S-video con-
nector, you’ll need an S-video cable in addition to the audio
cable and audio adapter. The S-video cable is sold sepa-
rately. (See “Optional Accessories” on page 43.)
2 Plug the composite video cable’s yellow connector into the
“video-out” connector on your video player (Figure 7). This
connector may be labeled “To Monitor.”
• If you’re using an S-video cable, connect it to the “S-video
out” connector on the video player (Figure 8).
3 Plug the other yellow connector into the composite video con-
nector on the projector.
• If you’re using S-video, plug the other end of the cable into
the “S-video” connector on the projector (Figure 8).
F IGURE 7
Connecting the projector to a video player using the standard video cable (with com-
posite video connector) and the audio cable and adapter
in in
composite video
audio cable
audio
adapter
cable