RKI Instruments 30-0951RK-IR - Manual (Page 7)

30-0951RK-IR Sample Draw Aspirator Adapter • 7
calibration adjustments necessary.
5. Disconnect the sample bag from the flowmeter inlet.
Parts List
Table 2 lists replacement parts and accessories for the sample draw adapter.
Table 2: Parts List
Part Number Description
06-1248RK Tubing, 3/16 x 5/16, polyurethane, for calibration kit
07-7218RK O-ring, .734 x .139, buna, for detector adapter
07-7225RK O-ring, 1.243 ID x .139, buna, for detector chamber
13-1070RK Captive panel screw, 10-32 x 1.75
81-0004RK Gas cylinder, 50% LEL propane in air, 17 liter, steel
81-0004RK-01 Gas cylinder, 50% LEL propane in air, 34 liter, steel
81-0004RK-03 Gas cylinder, 50% LEL propane in air, 103 liter, steel
81-0012RK Gas cylinder, 50% LEL methane in air, 17 liter, steel
81-0012RK-1 Gas cylinder, 50% LEL methane in air, 34 liter, steel
81-0012RK-03 Gas cylinder, 50% LEL methane in air, 103 liter, steel
81-0072RK Gas cylinder, 2.5% CO
2
in nitrogen, 17 liter, steel
81-0072RK-01 Gas cylinder, 2.5% CO
2
in nitrogen, 34 liter, steel
81-0072RK-03 Gas cylinder, 2.5% CO
2
in nitrogen, 103 liter, steel
81-1001RK Dispensing valve, for 17 liter and 34 liter steek cylinders
81-1051RK-60 Regulator with gauge and knob, 6 LPM, for 103 liter steel cylinder
81-1127RK Gas bag with fittings and hosebarb, 12 inches x 12 inches, 5 liters,
tedlar