5 connect the external antenna (sma type), 6 connect the modem to external device, 7 mount the modem – Robustel M1000 UP User Guide User Manual

Page 14: Connect the external antenna (sma type), Connect the modem to external device, Mount the modem

Advertising
background image

Robustel GoRugged M1000 UP User Guide


RT_UG_M1000 UP_v.1.0.0

17.10.2013

13 / 39

2.5 Connect the External Antenna (SMA Type)

Connect this to an external antenna with SMA male connector. Make sure the antenna is for the correct frequency as
your GSM/GPRS/UMTS/HSPA

operator with impedance of 50ohm, and also connector is

screwed

tightly.

2.6 Connect the Modem to External Device

User can use the USB cable to connect the modem’s Mini USB Connector to external slave devices / controller /
computer.
Note: User needs to install relevant USB driver to PC, which you can find out in the CD.

2.7 Mount the Modem

Use 2 pcs of M3 screw to mount the modem on the wall.



Screw tightly

Wall Mounting Screw Hold

Advertising