Robustel M1000 USB Quick Guide - Manual (Page 7)

Robustel GoRugged M1000 USB Quick Guide
RT_M1000 USB_QG_v01.00
25.01.2014 7 /7
3. Select Protocol as “Serial”.
4. Select the simulated COM port and match the parameters as below, click the “Next” button to finish this session.
Note: You need to disable “RTS/CTS.
5. Configuring the modem with AT command.
Note: Please refer to Robustel GoRugged M1000 USB User Guide to get more details about M1000’ configuration.