Blaupunkt BREMEN RCM 127 - Manual (Page 60)

60
Setting the equalizer manually
If you would rather set the equalizer manually, you can set nine different frequen-
cy bands from 63 Hz to 16 kHz for the front and rear loudspeakers separately.
In this case,
•
press S, EQ and MAN-EQ if necessary one after the other.
MAN-EQ (manual equalizer) must be highlighted.
• Press VIEW␣ EQ . VIEW MANUAL-EQ will appear in the display header.
The display will indicate the equalizer setting for the front loudspeakers.
• Select the frequency band by pressing << / >>. The frequency band select-
ed will appear at the bottom of the display.
• Alter the sound level by pressing / .
After you have completed the adjustments, press NEXT . REAR will appear in
the display. Adjust the equalizer for the rear loudspeakers.
• Press EXIT to exit the menu.
The last setting will be stored.
Calling up the manual equalizer setting
If you want the playback to take place with the manual equalizer setting,
•
press S, EQ and MAN-EQ if necessary one after the other.
MAN-EQ (manual equalizer) must be highlighted.
S
------------------
NEXT
VIEW MANUAL-EQ
FRONT
EXIT
S
NEXT
SET MANUAL-EQ
FRONT
EXIT 63 HZ
------------------