S&S Cycle Pushrod Cover Kits & Pushrod Cover Seal Kits for 1936–2014 Harley-Davidson & S&S Engines User Manual
Cycle, inc
S&S
®
Cycle, Inc
.
14025 Cty Hwy G PO Box 215
Viola, Wisconsin 54664
Phone: 608-627-1497 • Fax: 608-627-1488
Technical Service Phone: 608-627-TECH (8324)
Technical Service Email: [email protected]
Website: www.sscycle.com
Instruction
510-0282
06-17-14
Copyright © 2014
by S&S® Cycle, Inc.
All rights reserved.
Printed in the U.S.A.
Assembly Instructions: S&S Pushrod Cover Kits &
Pushrod Cover Seal Kits
for 1936–2014 Harley-Davidson® & S&S Engines
R
efer to the diagram to determine the correct
positions for pushrod cover components, and
the correct type of seals for various engine
styles. Note that depending on the kit you have
purchased, not all the components may be
included. In these cases it is expected that stock
components will be reused. In addition, not all
applications will use all components shown.
1.
Top pushrod seal
a. Harley-Davidson® knucklehead and S&S
KN-Series engines – this is a square o-ring.
Same seal in all three positions.
b. Harley Davidson® panhead, shovel,
Evolution® and Twin Cam 88® 96™ and
103™ and S&S P, SH, V, and T-Series engines
– the thickest o-ring of the three provided
in the kit
2.
Top Pushrod cover
3.
Pushrod cover keeper
4.
Cover cap
5.
Cover cap spring
6.
Cover cap washer
7.
Middle seal
a. Harley-Davidson® knucklehead and S&S
KN-Series engines – this is a square o-ring.
Same seal in all three positions.
b. Harley Davidson® panhead, shovel, Harley-
Davidson® Evolution® and Twin Cam 88®
96™ and 103™ engines and S&S P, SH, V, and
T-Series engines – the smaller diameter of
the thinner o-rings provided in the kit
8.
Lower pushrod cover
9.
Bottom cover washer – All Harley Davidson®
Evolution® big twins and S&S V-Series
engines, 1986-’90 Sportster® models, and all
S&S SB-Series engines. (not included in kit)
10.
Lower pushrod seal.
a. Harley-Davidson® knucklehead and S&S
KN-Series engines – this is a square o-ring.
Same seal in all three positions.
b. Harley Davidson® panhead, shovel, and
S&S P, SH-Series engines – This is a quad
seal
c. Harley-Davidson® Evolution® and Twin
Cam 88® 96™ and 103™ engines V, and
T-Series engines – the larger diameter of
the thinner o-rings provided in the kit
1
3
2
4
5
6
7
8
9
10