S&S Cycle Teardrop Air Cleaner Kit for 2002-Up Honda VTX 1800 Motorcycles User Manual
Page 3
Advertising
3
7- Install the M3x90mm o-ring into the adaptor back plate as shown in Picture 5.
8- Remove the four stock 5mm Phillips head screws from the stock air cleaner housing. See Picture 6.
9- Install the adaptor plate to the throttle body using four stock 5mm screws as shown in Picture 7. Make sure to apply Loctite® 243 to the screws
and tighten securely.
NOTE: Make sure to align throttle body bore with adaptor plate bore before tightening screws for best performance.
Picture 5
Picture 6
Picture 7
Advertising