S&S Cycle Super E & G Air Cleaner Backplate Assembly User Manual

Cycle, inc

Advertising

S&S

Cycle, Inc.

235 Causeway Blvd

La Crosse, Wisconsin 54603

Phone: 608-627-1497 • Fax: 608-627-1488

Technical Service Phone: 608-627-TECH (8324)

Technical Service Email: [email protected]

Website: www.sscycle.com

Instruction 51-1011

4-27-06

1991, 1999, 2006

by S&S Cycle, Inc.

Printed in the U.S.A.

Because every industry has a leaderr

Installation Instructions: Super E & G Air Cleaner Backplate Assembly

1. Washer, fast idle friction . . . . .Part #50-7035
2. Washer, fast idle steel . . . . . . .Part #50-7037
3. Washer, fast idle nylon . . . . . .Part #50-7036
4. Lever, fast idle:

All except ‘91-up Harley-Davidson

Sportster

models . . . . . . . . . .Part #17-0329

‘91 Sportster

models . . . . . . .Part #17-0327

5. Washer, fast idle brass . . . . . . .Part #50-7007
6. Screw, fast idle lever . . . . . . . .Part #50-0041
7. Backplate, air cleaner

‘55-’84 bt, ‘57-’85
Sportster

models . . . . . . . . . . .Part #17-0330

‘84-’92 bt, ‘86-’90
Sportster

models . . . . . . . . . . .Part #17-0380

“93-up bt, ‘91-up
Sportster

models . . . . . . . . . . .Part #17-0336

Notes:
●

Part #50-7035 (bowed spring
washer) - Place radiused side
towards backplate.

●

Part #50-7007 - Place stepped side
towards backplate.

●

Part #50-0041 - Tighten securely
without stripping threads in
backplate.

Super E and Super G air cleaner backplates, parts #17-0330, #17-0336 and #17-0380, come
disassembled and must be assembled before installation. The line drawing below shows
the correct sequence of assembly of the fast idle lever mechanism. Tighten fast idle
screws, part #50-0041, securely without stripping threads in backplate. Loctite

or some

other “thread glue” may be used sparingly on screw threads to be sure they do not
vibrate loose.

Note - When air cleaner backplate is installed on
carburetor, be sure to properly engage fast idle
enrichment plunger, part #11-2343

S&S