S&S Cycle EZFI on 2008-09 Touring Models - Manual (Page 3)

3
5- Once the connector has been disconnected from the ECM, rotate the connector locking bar half-way towards the wire bundle and use a small
screwdriver to depress the tabs on the ends of the connector to remove the wire cover. See Pictures 3 & 4.
6- Use a small screwdriver to slide out the green terminal retainer as shown in Picture 5.
7- Make a 1” slit along the wire conduit. See Picture 6.
Picture 3 Picture 4
Picture 5
Picture 6