Behringer EUROPOWER PMP6000 - Manual (Page 4)

Page 4 of 8
PHANTOM switch
provides 48V to
the XLR inputs
for use with
condenser mics
METERS
display main
and monitor
output
signal levels
MULTI-FX
Processor adds
selected sound
effect to channels
whose FX knob is
turned up
POWER AMP
switch selects
operating mode
of power amp
EQ knobs adjust
high, mid and
low frequencies
of channel
MON knob
adjusts amount
of channel’s signal
sent to MONITOR
output jack and/
or OUTPUT A
when driving
passive monitors
FX 1 & 2 knobs
adjust amount
of signal sent to
respective
multi-FX
processors
FX RET 1 & 2 knobs
adjust amount
of signal from
internal multi-FX
processor in main
or monitor mix
GRAPHIC
EQ adjusts
specific
frequencies
SPEAKER PROCESSING
switch allows mixer to
compensate for speakers
with limited low end
frequency response
STANDBY
button
mutes all
input channels
except CD/TAPE
inputs
ON/OFF
button
MONITOR MASTER
knob adjusts
output of monitor
signal and OUTPUT
A when using
MON/MONO mode
CD/TAPE IN
knobs adjust
volume
of CD/TAPE IN
signal in main
or monitor mix
LEVEL knob
adjusts channel
volume
PAN knob
positions
channel in
stereo field
MAIN MASTER
knob adjusts
output of main
signal
Small, Simple, Superb
Medium-sized events call for a
lightweight (PMP6000: 13.1 kg/28.9 lbs;
PMP4000: 0.4 kg/22.9 lbs; PMP1680S:
9.9 kg/28.8 lbs), easy-to-use
powered mixer. BEHRINGER powered
mixers are the most efficient,
affordable mixers for the job, and are even
suitable for use as pure analog mixers
or as pure power amplfiers. With new
technological advantages and incredible
built-in features, it’s easier than ever to
lend exceptional sound quality to all kinds
of public performances.
EUROPOWER
PMP6000
PMP4000
PMP1680S