Salsbury Industries Cell Phone Locker Pedestal For Select 19000/19100 Series Surface Mounted Cell Phone Lockers - Manual

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624-5269 Int’l Phone: 323-846-6700
Fax: 1-800-624- 5299 Int’l Fax: 323-846-6800
www.lockers.com www.mailboxes.com engineering @ mailboxes.com [email protected]
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2013 Salsbury Industries. All rights reserved. (Rev. 1, 9/16/2013) Page 1 of 2
Cell Phone Locker Pedestal
For Select 19000/19100 Series Surface Mounted Cell Phone Lockers
Installation Instructions
Installing the Cell Phone Locker on the Pedestal
Step 1: Install the pedestal to the mounting surface. Use 1/2 in. diameter anchors (not provided).
Step 2: Remove the cell phone locker from the enclosure. Drill eight (8) 7/16” diameter holes through the bottom of the enclosure. Match the hole
locations on the top pedestal plate.
Step 3: Position the enclosure on the top pedestal plate then position the interior support plate inside the enclosure. Assemble to the pedestal by
installing 3/8”-16 x 1-1/2” long hex bolts (provided) through the top pedestal plate, through the bottom of the enclosure and through the interior
support plate. Fasten with 3/8” lock washers and hex nuts (provided).