Salsbury Industries 4890 Series Classic Mailbox Posts - Manual (Page 4)

SALSBURY INDUSTRIES
1010 East 62
nd
Street, Los Angeles, CA 90001-1598
Phone: 1-800-624- 5269 Int’l Phone: 323-846-6700
Fax: 1-800-624- 5299 Int’l Fax: 323-846-6800
www.mailboxes.com engineering @ mailboxes.com
Installation instructions are provided as general guidelines. It is advised that a professional installer be consulted. Salsbury Industries assumes no product assembly or installation liability.
Copyright © 2013 Salsbury Industries. All rights reserved. (Rev. 02, 7/23/13)
CLASSIC MAILBOX POSTS
Post Assembly Installation Instructions
U.S.P.S. APPROVED
Classic Mailbox Post Assembly
Thank you for selecting Salsbury’s classic mailbox post. This instruction
sheet is for assembling the top mounted, 1-sided (1- mailbox per side), or 2-
sided (2 mailboxes per side) classic mailbox post. Other installation
instructions are available for installing the mailbox, mounting a newspaper
holder, and mounting the post in a concrete footing. All hardware to
assemble the classic mailbox post is provided.
4890 – Top Mounted
Attach the base to the post by installing two (2) M8 x 1.25 x 25 mm long hex
bolts through two (2) M8 flat washers then through the base and through the
two (2) tapped holes on the bottom of the base. Installation is now complete.
4891 – 1 Sided for 1 Mailbox
1. Attach the base to the post by following the step described for the 4890
top mounted classic post.
2. Install the M12 x 1.75 x 40 mm long hex bolt through the center hole on
the mounting arm and through the M12 x 1.75 hex nut.
3. Attach the mounting arm to the post by installing four (4) M8 x 1.25 x 20
mm long pan head bolts through the four (4) slotted holes on the top of the
mounting arm and through the four (4) tapped holes on the top of the classic
mailbox post.
4. Install the finial onto the M12 x 1.75 x 40 mm long hex bolt. Installation is
now complete.
Note: On the 4891 classic mailbox post, the mounting arm which
accommodates the mailbox can be on either the left or right side. When
attaching the post to the ground, position the post so the mounting arm is on
the side desired. Then mount the mailbox on the mounting arm with the
mailbox facing the street or roadway.
4892 – 2 Sided for 2 Mailboxes
To assemble the 4892 classic mailbox post, follow the steps listed for the
4891 classic mailbox post.