SATEC RSC232 - Manual (Page 2)

LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on the
instrument for faulty workmanship or parts from date of dispatch from the
distributor. In all cases, this warranty is valid for 36 months from the date of
production. This warranty is on a return to factory basis.
The manufacturer does not accept liability for any damage caused by instrument
malfunction. The manufacturer accepts no responsibility for the suitability of the
instrument to the application for which it was purchased. Failure to install, set up or
operate the instrument according to the instructions herein will void the warranty.
For additional information regarding installation, operation or maintenance of this
equipment, contact the manufacturer or your local representative or distributor.
IMPORTANT
Please read this manual thoroughly before performing installation
and take note of the following precautions. Failure to observe
precautions can result in serious or even fatal injury or damage to
equipment.
Ensure that all incoming AC power and other power sources are turned OFF
before performing any work on the unit.
Check that your unit is equipped with the appropriate power supply before
connecting the unit to the power source.
Do not connect the unit to a power source if it is damaged.
Do not expose the unit to rain or moisture.
Contents
1. General .........................................................................................1
2. Mechanical Installation - Wall Mount: 2 options ..........................2
3. Electrical Installation ....................................................................4
4. Multi-drop Operation Mode...........................................................7
5. LED Indicators ..............................................................................8
6. Impedance Matching and Termination Resistors ........................8
7. Specifications ...............................................................................8
BG0274 Rev. A5