Scan Tech HYW Power Generator - Manual

Scan Tech AS
Skogstøstraen 21 Po.Box. 738 Tel. +47 51 54 54 00 [email protected]
4021 Stavanger 4001 Stavanger Fax +47 51 54 54 50 www.scan-tech.no
Model Engine Power
kVA kW
P.R.P(1) S.By(2) P.R.P(1) S.By(2)
Cyl Feed
(3)
Dimensions mm.**
L W H
Weight**
Kg
Fuel
Tank Ltr
Fuel Cons.*
L/h.
HYW‐8 T5 3TNV76 7,8 8,6 6,2 6,9 3L NA 1 475 750 1 110 611 23 1,98
HYW‐13 T5 3TNV88 12,3 13,3 9,8 10,7 3L NA 1 475 750 1 110 666 23 2,74
HYW‐17 T5 4TNV88 16 17 12,8 13,6 4L NA 1 920 900 1 230 701 38 3,63
HYW‐20 T5
4TNV84T 20 22 16 18 4L TC 1 920 900 1 230 720 38 4,25
HYW‐35 T5 4TNV98 31 33 25 27 4L NA 2 000 950 1 270 905 60 6,56
HYW‐45 T5 4TNV98T 41 45 33 36 4L TC 2 250 1 050 1 450 1 081 65 7,78
*Fuel consumption measured in ltr/hr. at 75% load at 1500 rpm at 50Hz.
**Weights and dimensions are subject to variations depending to the
generators configuration solicited by the customer.
To be consulted by Scan Tech.
Ambient reference conditions:
1 000 mbar, 25°C, 30 % relative humidity. Rating according to ISO 3046
1 – P.R.P. Prime Power – ISO 8528: Prime power is the maximum power
available during a variable power sequence, which may be run
for an unlimited number of hours per year, between stated maintenance
intervals.
The permissible average power output during a 24 hours period shall not
exceed 80% of the prime power.
10% overload available for governing purposes only.
2 – Standby power (ISO 3046 Fuel Stop power): Power available for use at variable loads for limited annual
time (500h), within the following limits of maximum operatingtime: 100% loads 25h per year – 90% loads
200h per year. No overload available.
Applicable in case of failure of the main in areas of reliable electrical network.
3 – NA= Natural Aspirated
TC= Turbocharged
Scan Tech reserve the right of modify any characteristic without prior notice. Weights and dimensions based on products standards and sec / illustrations may include optional equipment.
Technical data here described correspond with the available information of the moment of printing. Industrial design under patent.