Schwank ecoSchwank-X 52 - Manual

ECO-X 36-52 / IL-X 150-200 Manual
IM100116
RD: MAY 2009
RL: 05A - BA
Gas-Fired Luminous (High Intensity) Infrared Heaters
INSTALLATION / OWNER’S MANUAL
Improper installation, adjustment, alteration, service or
maintenance can cause property damage, injury or death.
Read the installation and operating and maintenance instruc-
tions thoroughly before installing or servicing this equipment.
Not approved for use in any residential application.
SAFETY ALERT:
This heater must be installed and serviced only by a trained gas service techni-
cian. Failure to comply could result in personal injury, death, fire and/or property
damage.
Do not store or use gasoline or other flammable vapours and liquids in the
vicinity of this or any other gas fired appliance.
IF YOU SMELL GAS:

Extinguish any open flame

Do not attempt to light this or any other appliance

Don’t touch any electrical switch, or telephone

Immediately leave the area and call your gas supplier from a neighbor’s
phone

Follow any and all instruction from your gas supplier

If your gas supplier is not available, call the fire department
WARNING
ecoSchwank-X
36, 52
IL-X 150, 200
FIELD CONVERTIBILITY:
This appliance is field con-
vertible to LP gas. Use kit
available from manufacturer.
See page 14. Follow all lo-
cal and national codes.
INSTALLER: PRESENT THIS MANUAL
TO THE END USER.
Keep this manual in a secure place .
Record for future reference
:
Model #:
Serial #:
(located on heater rating label)