Iv. maintenance – SciGene NoZone Ozone Scrubber User Manual
Page 8
NoZone® Ozone Scrubber — USER GUIDE
Version 1.0a, May 2012 (408) 733-7337, [email protected]
7
IV. MAINTENANCE
Do not attempt to remove the cover or perform any service inside the instrument.
The NoZone® Ozone Scrubber is a sealed unit.
Due to the sealed design of the chassis and its non-replaceable parts, contact SciGene
Technical Services (
) or your local distributor if any failure or
malfunction occurs.
The proprietary ozone destruct media is renewable and will not require replacement.
A. Checking and Replacing Fuses
Turn the power switch to the OFF position and unplug the
power cord before performing any service procedure.
The main fuse is located at the top of the unit. The fuse may be replaced by the customer
by turning off and unplugging the unit, then gently twisting and removing the old fuse. A
blown fuse appears dark. Always replace fuses with those of the same amperage and
voltage as shown on the label.
B. Cleaning
Keep the air inlet free of obstruction by occasionally removing dust with a dry towel. No
replacement of catalyst is needed.