Brother INTELLIFAX 3550 - Manual (Page 36)

4 - 3
TELEPHONE FUNCTION SETTINGS
3550-US-5.0
Setting the Station ID
The Station ID is for identification purposes. Here you can store your name, fax number, and
telephone number. Your machine prints this information on the electronic Cover Page and every
fax page you send.
• The telephone number that you stored above is only used for the Call Back Message and the
Cover Page features.
• If you do not enter a fax number, no additional information can be entered.
• When you want to enter a blank space, use X (right arrow). You can back up to change entries
by using the Z (left arrow).
• If the Station ID has been programmed, then after Step 3 the name will be displayed with the
prompt “1” to change “2” to exit. Press “1” to change information. Press “2” to exit from the
function.
N A M E : B R O T H E R
N A M E :
ENTER & SET
7 . S E T U P S Y S T E M
1 . T E M P . S E T T I N G S
0 9 / 1 2 / 1 9 9 6 1 5 : 2 5
THE DISPLAY WILL SHOW: KEYS TO PRESS
1. Press Function .
2. Press 7 .
3. Press 4 .
You will be prompted to enter your fax
number.
4. Enter your fax number (up to 20
digits).
Example: 4155554444 .
5. Press Set .
You will be prompted to enter your
telephone number.
6. Enter your telephone number (up
to 20 digits).
If your telephone number and fax
number share the same line, enter the
same number again.
Example: 4155554445 .
7. Press Set .
You will be prompted to enter your name
or company’s name.
8. Enter your name by using the
number keys (up to 20 characters).
Example: BROTHER .
Refer to the section “How to Enter Text
in Function Mode” on pages 3-7~8.
4 . S T A T I O N I D
F A X :
ENTER & SET
F A X : 4 1 5 5 5 5 4 4 4 4 _
T E L :
ENTER & SET
T E L : 4 1 5 5 5 5 4 4 4 5 _