BenQ LCD Monitor XL2410T - Manual (Page 38)

38 How to adjust your monitor
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
OSD Lock Prevents all the monitor
settings from being
accidentally changed. When
this function is activated,
the OSD controls and
hotkey operations will be
disabled.
Press the or keys to
change the settings.
To unlock the OSD controls
when the OSD is preset to
be locked, press and hold
the "MENU" key for 15
seconds to enter the "OSD
Lock" option and make
changes. Alternatively, you
may use the or
keys to select "NO" in the
"OSD Lock" submenu from
the "OSD Settings" menu,
and all OSD controls will be
accessible.
• YES
• NO
Press MENU to leave the OSD Settings menu.
DDC/CI* Allows the monitor settings
to be set through the
software on the PC. Press the ENTER key to select
this option. Press the or
keys to change the
settings.
• ON
• OFF
Information Displays the current
monitor property settings. • Input
• Current
Resolution
• Optimum
Resolution (best
with the
monitor)
• Model Name
HDMI Auto
Switch When this function is
activated, HDMI port will
be in the input auto select
loop. Otherwise, HDMI can
only be selected by input
select or by hot key. Press the ENTER key to select
this option. Press the or
keys to change the
settings.
• ON
• OFF
The default
setting is OFF.
Auto Power Off Sets the time to power off
the monitor automatically
in power saving mode.
Press the ENTER key to select
this option. Press the or
keys to change the
settings.
• OFF
• 10min.
• 20min.
• 30min.
Reset All Resets all mode, color and
geometry settings to the
factory default values.
Press the or keys to
change the settings.
• YES
• NO