SDC 463U/463NU REQUEST-TO-EXIT SWITCH - Manual

Input Voltage Requirements:
12-24V AC/DC
Current Draw:
Idle-30mA, Active-150mA
Output:
1 Dry Relay Contact, SDPT
3 Amp @ 30VDC (Resistive)
Relay Time:
Adjustable – 1 to 30 seconds
or Toggle Mode – ON/OFF
Switch Operating Environment:
-40° F to +160°F (-40° C to +70°C)
Dimensions:
463U - Standard
4.75" H x 3" W x 1.125" D
(120.65 x 76.20 x 28.58 mm)
463NU - Narrow
4.75" H x 1.75" W x 1.125" D
(120.65 x 44.45 x 28.58 mm)
Specifications
INSTALLATION INSTRUCTIONS
MODEL 463U/463NU
REQUEST-TO-EXIT SWITCH
Mounting Method
463U:
Mounts directly to a single gang switchbox.
463NU: Mullion mount
(See template below. Not to scale.)
1.75"
Faceplate
4.75"
Faceplate
1.562"
1-9/16"
2.875"
2-7/8 "
#6-32 Tapped (X 2)
C
L
0.25"
¼”
Any suggestions or comments to this instruction or
product are welcome. Please contact us through
our website or email [email protected]
P:\INSTALLATION INST\Push and Key Switch\INST-463U.vsd REV A 01-14 Page 1
PUSH TO
EXIT
text
PUSH TO
EXIT
text
801 Avenida Acaso, Camarillo, Ca. 93012 • (805) 494-0622 •
www.sdcsecurity.com • E-mail: [email protected]