Sentey B-Trek S2 - Manual (Page 4)

• Pairing: When the speaker is in Bluetooth mode it will automatically be in
pairing mode if not already paired to a device. Search for B-Trek S2 in your
device’s pairing screen and select to connect it. If asked for a pairing code
or password enter 0000 (four zeroes). If not in a pairing mode press the
mode change button ( ) until the indicator LED flashes between red
and blue.
• Music playback & Volume can be controlled from the device or the speaker
by using the Basic Operation instructions above.
• Hands Free: If the speaker is paired with a mobile phone, it will function as
a hands free device. When you have an incoming call press the
play/pause/answer button ( ) to answer. Hold the play/pause/answer
button ( ) for 3 second to reject the call. You can also press the
play/pause/answer button ( ) quickly twice to redial the previous call.
2. BLUETOOTH OPERATION
• Press the mode change button ( ) to toggle between modes and enter
the FM Radio mode.
• Press the previous/volume down or next/volume up buttons ( ) to step
through each FM frequency in the indicated direction.
• Press the play/pause/answer button ( ) to scan for FM stations
automatically. The speaker will stop when it finds a strong signal.
• The volume can be controlled as indicated in the Basic Operation above.
3. FM OPERATION
• Inserting a 3.5mm auxiliary audio cable into the AUX line in port will
automatically set the speaker in the AUX line in mode. If you already had a
3.5mm audio cable inserted and were in another mode, you can press the
mode change button ( ) to toggle into the AUX line in mode.
• The volume can be controlled as indicated in the Basic Operation above.
• Music playback can be controlled from the device or the speaker (if the
connected device supports commands through 3.5mm audio cable) by
using the Basic Operation instructions above
4. AUX LINE IN OPERATION