Skyjacker FAA281 - Manual

Before beginning the installation, thoroughly & completely read these instructions & the enclosed
driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view
of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior
to the disassembly of the vehicle. If any parts or hardware are found to be missing, contact
SKYJACKER® Customer Service at 318-388-0816 to obtain the needed items. If you have any
questions or reservations about installing this product, contact SKYJACKER® Technical Assistance
at 318-388-0816.
Important Notes:
• This lift is designed to fit midsize Polaris Ranger applications equipped with McPherson struts thru
2012. (See below for listed applications.)
• 2005 - 2008 Polaris Ranger 500 XP
• 2006 - 2009 Polaris Ranger 700 XP / Crew
• 2010 - 2012 Polaris Ranger EV, 400, 500 XP / Crew
• McPherson struts are preloaded & are under extreme pressure. A strut spring compressor is
required for their removal & installation.
• Pay close attention to the inner plunge socket depth of the cv-shafts & do not disengage during the
disassembly & assembly of this product.
05 - 12 Polaris Ranger XP / Crew
1" Front Suspension Lift
Forward A-Arm Kit
Installation Instructions
(See Important Notes Below For Application Listings)
RequIRed TooL LIST:
• Safety Glasses
• Floor Jack
• Jack Stands
• Metric / Standard Wrenches & Sockets
• Strut Spring Compressor
• Measuring Tape
• Torque Wrench
www.skyjacker.com
I-FAA281 7-14 Pg 1