Skyjacker TJ403BPM User Manual

Skyjacker For the car

Advertising
background image

Before beginning the installation, thoroughly & completely read these instructions & the enclosed

driver’s WARNING NOTICE. Affix the WARNING decal in the passenger compartment in clear view
of all occupants. Please refer to the Parts List to insure that all parts & hardware are received prior
to the disassembly of the vehicle. If any parts are found to be missing, contact SKYJACKER

®

Customer Service at 318-388-0816 to obtain the needed items. If you have any questions or

reservations about installing this lift kit, contact SKYJACKER

®

Technical Assistance at 318-388-0816.

Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is not

level (side-to-side) from the factory & is usually not noticed until a lift kit has been installed, which

makes the difference more visible. Using a measuring tape, measure the front & rear (both sides)

from the ground up to the center of the fender opening above the axle. Record this information

below for future reference.

Driver Side Front:

Passenger Side Front:

Driver Side Rear:

Passenger Side Rear:

IMPORTANT NOTES:

• This lift is determined from the amount of lift to the front of the vehicle, while only lifting the

rear to a position level with the front.

• If larger tires (10% more than the stock diameter) are installed, speedometer recalibration

will be necessary. Contact your local Jeep dealer or an authorized dealer for details.

• After installation a qualified alignment facility is required to align the vehicle to factory

specifications.

• 6-speed transmission models may require additional modifications. The options are

trimming of the console or bending of the shifter.

• On models outfitted with extra bolt-on equipment & accessories, SKYJACKER

®

offers new

coil spring isolator pads made from polyurethane to increase the ride height 3/4", front or

rear (Part # SIP275, pair).

97-06 Jeep TJ Wrangler

4" Suspension Lift

Installation Instructions

REquIREd TOOL LIST:

Safety Glasses

Metric / Standard Wrenches & Sockets

drill / Assorted drill Bits

Floor Jack

Jack Stands

Measuring Tape

Torque Wrench

www.skyjacker.com

I-TJ4013B REV3 2-13

Pg 1

Advertising
This manual is related to the following products: