Skyjacker T422 - Manual

1. Before beginning the installation, read these instructions and the enclosed driver’s
WARNING NOTICE thoroughly and completely. Also affix the WARNING decal in passenger com-
partment in clear view of all occupants. If any of these items are missing from this instruction packet,
do not proceed with installation, but call SKYJACKER® to obtain needed items. If you have any
questions or reservations about installing this lift kit, call SKYJACKER® at 318-388-0816 for
Technical Assistance or Customer Service departments.
Make sure you park the vehicle on a level concrete or asphalt surface. Many times a vehicle is
uneven (side-to-side) from the factory, but usually not noticed until a lift kit has been installed which
makes the difference more visible. Using a measuring tape, measure the front and rear (both sides)
from the ground up to the center of the fender opening above the axle. Record below for future ref-
erence.
Driver Side Front: Passenger Side Front:
Driver Side Rear: Passenger Side Rear:
IMPORTANT NOTES:
• Please refer to Parts List to insure that all parts and hardware are received prior to disassembly of
vehicle. If any parts are found to be missing, contact your dealer as soon as possible.
• If larger tires (10% more than stock diameter) are installed, speedometer recalibration is necessary
(see Toyota dealer or Tire Store).
• Only wheels with no more than 3 3/4” backspacing can be used with this lift.
• After installation occurs, a qualified alignment facility is required to align the vehicle to factory
specs.
• After installation occurs, realign headlights to proper position.
Toyota 4x4 IFS
86-95 Pickup, 86-89 4 Runner
4” Lift Kit
Installation Instructions
REquIREd TOOL LIST:
* Metric / Standard Wrenches and Sockets
* Floor Jack
* Jack Stands
* Measuring Tape
* Torque Wrench
www.skyjacker.com
IT422/432 REV1 4-10 Pg 1