Controls and functions, Projector – BenQ MP522 ST User Manual
Page 10
Introduction
10
Controls and functions
Projector
7.
TEMPerature indicator light
Lights up red if the projector's
temperature becomes too high. See
for details.
8.
LAMP indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See
for
details.
9.
AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 29
for
details.
10.
Keystone/Arrow keys (
/ Up,
/
Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 30
for
details.
11.
Right/
for details.
When the On-Screen Display (OSD)
menu is activated, the #5, #10, and #11
keys are used as directional arrows to
select the desired menu items and to make
adjustments. See
for details.
12.
Mode/Enter
Selects an available picture setup mode.
See
"Selecting a picture mode" on page 32
for details.
Enacts the selected On-Screen Display
(OSD) menu item.
for details.
13.
SOURCE
Displays the source selection bar. See
"Switching input signal" on page 28
for
details.
1.
Focus ring
Adjusts the focus of the projected image.
See
"Fine-tuning the image clarity" on page
for details.
2.
POWER indicator light
Lights up or flashes when the projector is
under operation. See
for details.
3.
Menu/Exit
Turns on the On-Screen Display (OSD)
menu.Goes back to previous OSD menu,
exits and saves menu settings.
See
details.
4.
Power
Toggles the projector between standby
mode and on. See
for details.
5.
Left/
Starts the FAQ function. See
6.
BLANK
Used to hide the screen picture. See
for details.
I
I